Hello, we are a manufacturer with complete specifications. You can directly contact customer service for consultation or call us. Please try your best to tell us the detailed parameters and power parameters of the product. We will help you recommend the most suitable model. Please order special power and parameters. Proposed separately.
According to the characteristics of gold imitation electroplating process, three stages of electroplating are specially designed. The first stage of electroplating is automatically transferred to the second stage. When the second stage of electroplating is completed, the second stage of electroplating is automatically transferred to the third stage. When the third stage of working time arrives, the equipment stops automatically and gives an audible and visual alarm.
For factory and commercial applications, power supplies and rectifiers directly affect the efficiency of the entire production line and the quality of products. A device that frequently fails will not only cause trouble, but also loss of money and management costs.
Our power supply and rectifier adopt high-efficiency, fully-sealed, anti-corrosion, moisture-proof, waterproof, shock-proof, anti-radiation, anti-interference and highly stable circuit design in the structure and circuit design. We use German imported Infineon IGBT modules and integrated ICs. , Japan Mitsubishi active drive, the transformer adopts nanocrystalline amorphous material, small size, high power, self-developed high-frequency transformer, all conduction uses oxygen-free copper, conductivity 99%, high-efficiency energy-saving rectifier tube, accurate digital display, Stable current and voltage stabilization function, with under-phase protection, over-current protection, and over-heat protection to ensure stable and smooth production for customers. The over-sufficient power has strong reliability, good followability, and high stability, and it can guarantee full load 24 hours a day and 365 days. run.
For customers in the electroplating industry, the enameled wire used in our products adopts high temperature and corrosion resistant Teflon wire, and the copper interface is tinned to improve conductivity and good corrosion resistance. Achieve 7x24x365 full power operation, stable and smooth. The designed service life is more than 20 years, and the goal of zero failure.
We adopt more advanced technology to meet the production requirements of electroplating factories, international advanced bridge converter technology and PWM constant frequency pulse width modulation technology, synchronous rectification technology, n+1 signal parallel technology, pure DC technology, ultra-high power DC Technology, special power supply customization. The system response speed is fast [microsecond level], the efficiency can reach more than 95%, and the ripple coefficient can reach less than 0.5%. The output waveform is purer and smoother, the electroplating quality is better, the metal particles are more detailed, the high and low areas are more uniform and brighter, and the current intensity of the dead corners is improved, and the speed is faster.
With more advanced control functions and international communication interfaces, centralized management and monitoring through computers, intelligent control of balanced load, master-slave control mode; making the control and management of modern industrial automatic production lines simple and convenient. Precise digital touch screen control, man-machine interface and network communication interface, high-definition digital tube display, touch button control, the operation interface is clear at a glance;
No rose without a thorn, the rectifier will also have accidents, and the shutdown and maintenance will bring huge losses to customers. We have taken this into consideration in product design. The modular quick-plug design and separate switch allow maintenance personnel to quickly maintain the equipment without stopping the production line, ensuring the normal production of the production line.
The high-frequency switching power supply adopts PWM pulse width modulation, rectifier filter circuit, full-bridge conversion circuit, etc. It is widely used in industrial control, power electronics, electroplating, water treatment industry, communication equipment testing, laboratory, scientific research, automatic testing equipment, Aging test of electronic components, hard oxidation, electrolysis, aluminum anodization and battery charging, printed circuit board production, electronic testing equipment, production line equipment, medical treatment, railways, ships and other high-tech fields.
The cost control of production enterprises has always been a concern of the boss, and it is also the key for processing enterprises to improve their market competitiveness. The high frequency switching power supply adopts the international advanced bridge converter technology, PWM constant frequency pulse width modulation technology and synchronous rectification technology, so that the actual output frequency can reach 30kHz, which greatly improves its energy efficiency. The efficiency of high frequency switching power supply is about 95%, while that of SCR is only 70%.
The efficiency of high frequency switching power supply is about 95%, while the thyristor is only 70%.
Let us visually estimate its value:
Take the specification (1000A/12V) power supply as an example, working 10 hours a day, 350 working days a year, industrial power consumption: 0.9 yuan/kWh;
12 kilowatts / 70% * 10 hours / day * 350 days * 0.9 yuan / kWh = 54000 yuan
High frequency switching power supply:
12 kilowatts/95%*10 hours/day*350 days*0.9 yuan/kWh=40,300 yuan
So it can be seen
Using high-frequency switching power supply, one device can save 13,700 yuan in electricity bills every year
If it is a higher power device, the power saving effect is more obvious
Need more detailed parameters, please communicate with us, we are very happy to provide you with the information you need.
According to the characteristics of gold imitation electroplating process, three stages of electroplating are specially designed. The first stage of electroplating is automatically transferred to the second stage. When the second stage of electroplating is completed, the second stage of electroplating is automatically transferred to the third stage. When the third stage of working time arrives, the equipment stops automatically and gives an audible and visual alarm
|Product name/brand||High frequency imitation gold electroplating power supply ( Jia fei )|
|Regulation mode||Analog stepless regulation (three time timing function)|
|Output current||0-750A (customized)|
|Output voltage||0-18V (customized)|
|Operation control mode||Steady voltage or steady current|
|Adjustable range||0-rated maximum value (voltage ,current ) stepless adjustable|
|Cooling mode||Air cooling|
|Output wavefrom||DC square wave|
|Insulation strength||Input – output : AC1500v,10mA, 1min|
|Insulation strength||Input – housing : AC1000v,10mA, 1min|
|Power on output voltage overshot||≤2% maximum output|
Control mode This machine control ,anticorrosion remote control box (LED digital display tabel) high-defintion touch screen intelligent control
Communication interface Standard RS485 communication analog control (0-5V,0-10V,4-20mA)optional ( instructions when ordering )
Working environment The ambient temperature is -10ºC-40ºC;the relative temperature of air is not more than 90%(ambient tmperature 20ºC)±(at 5ºC)
Working limits It can run at full power for 24 hours ,365 days
Protection function Over current ,over voltage , over temperature ,short circuit ,lack of automatic alarm function
Dimensions 401mm*451mm*150mm (L*W*H) (size slighty changed ,subject to the actual situation)
Technical performance index of high frequency switching power supply
|input voltage(V)||Three phase AC380V + / -10%|
|Voltage stabilization accuracy(%)||<0.5%|
|Steady current accuracy(%)||<0.5%|
We can not only produce a large number of high-frequency switching power supplies and rectifiers, but also tailor-made production. Welcome to call for consultation and inspection of the factory. We have adopted excellent technology in all aspects of our products, and the appearance is consistent with the internal quality assurance. Our equipment is usually used in electroplating plants, environmental protection plants and other environments containing corrosive gases. It requires high technology and craftsmanship.
Starting quantity and price: 1P / 390 USD
Note: Only professionally trained personnel can disassemble the components and perform maintenance and device replacement; do not leave metal parts such as screws and washers in the machine, otherwise there will be a danger of damaging the equipment and personnel; the user should use 3 parts according to the environment The equipment shall be inspected regularly every month or 6 months.
n order to ensure that the customer can fully operate the machine, if the customer needs, we can help the customer to conduct training, including:
(1) Correct operation mode
(2) Correct maintenance method
(3) Eliminate simple problems
(4) Video tutorial support
(5) Online video call service support
All equipment of our company has been widely used in the field of electroplating.